nico
Newbie
Posts: 14
|
 |
« on: June 03, 2009, 01:14:37 PM » |
|
Hello
I have a Meade RCX 400 telescope
And I have a starlight lodestar auto guider CCD camera
If I want to use the auto guider port it is not working
Do you have a schedule of the auto guider port
And is there some thing how I can test the auto guider port
I have use this schedule of the old meade lx 200 but that is not working on my meade rxc 400 telescope
| 1 2 3 4 5 6 |
+----+ +----+
+---+
1 "NC contact" (not used)(an LX200gps has +12v here)
2 - Ground
3 - Right (CW)
4 - Down
5 - Up
6 - Left (CCW)
bye
Nico
|
|
|
|
« Last Edit: June 03, 2009, 01:17:41 PM by nico »
|
Logged
|
|
|
|
|
Mark Sibole
|
|
« Reply #1 on: June 04, 2009, 07:45:31 AM » |
|
Nice.
I do not have any expierence on the RCX models so im shooting in the dark on this.
The auto guider cable my be the wrong one .
Also check the documentation for the proper cable. should be a RJ 12
See if there is an option in the settings to turn off or turn on the auto guider port.
Mark
|
|
|
|
|
Logged
|
|
|
|
nico
Newbie
Posts: 14
|
|
« Reply #2 on: June 04, 2009, 10:02:10 AM » |
|
Mark
I have no documentation of the auto guider port
in the manual is nothing found
I have not found a way to turn the auto guid port on or off
I use a RJ 12 cable
Nico
|
|
|
|
|
Logged
|
|
|
|
nico
Newbie
Posts: 14
|
|
« Reply #3 on: June 11, 2009, 03:44:59 AM » |
|
Hello
I have renew the meade rcx firmware and the auto guider port is working
Nico
|
|
|
|
|
Logged
|
|
|
|
|
Mark Sibole
|
|
« Reply #4 on: July 16, 2009, 10:59:26 AM » |
|
Im glad this issue is resolved.
The port should be in an always on position.
The firmware may have gotten corrupted some where along the line.
Regards
Mark
|
|
|
|
|
Logged
|
|
|
|
|
